This product offers great weather protection from rain. Wind Rating up to 39mph.
No fiddling about pegging poles or inflating your tent. Just unzip and unfold the roof tent.
130 cm x 220 cm mattress size (Double beds in the UK are typically 135cm x 190cm)
At only 50kg this roof tent will fit almost every vehicle
The TentBox Lite 2.0 Awning Bundle contains the soft shell roof tent; The TentBox Lite 2.0 and the Lite 2.0 Tunnel Awning with two optional sets of telescopic poles. The TentBox Lite 2.0 is a two berth sized roof tent in a fold out design.
The addition of telescopic poles allows you to put the Tunnel Awning into wing mode giving you cover whilst giving a place to setup your kitchen area.
Main Features:
The TentBox Lite 2.0 Awning Bundle includes:
Covered Car Access
Gives you covered access to your car door with protection from the wind and rain when you go up and down the ladder.
Wing-mode
Open the side panels with telescopic poles and create a large to relax.
Cover from the weather
Stay nice and dry away from the wind and rain.
Extra space
The Tunnel Awning provides extra space for an extended camping setup to relax in.
With its foldable design the TentBox Lite 2.0 folds out into an impressive space for two adults to sleep comfortably. With an internal mattress size of 130cm x 220cm (Double beds in the UK are typically 135cm x 190cm).
Another benefit of the foldable design is the small form factor when the roof tent is packed away. Folding away into a dimension of 133cm x 110cm x 25cm it's perfect for the majority of cars. So if you drive a large or small vehicle this will work perfectly as long as your dynamic limits allow.
With a waterproof rating of 3000mm for the inner pod and 5000mm for the rainfly the TentBox Lite 2.0 makes sure you'll stay dry during those wet British weather.
All fabric used in the TentBox Lite 2.0 includes UV50+ protection, ensuring that you stay safe and protected from harmful UV rays while camping.
The TentBox Lite 2.0 comes with a removable main rainfly that allows you to activate summer mode. This means you can enjoy the summer without the need to set up the outer rainfly during the dry months!
| Weight | 50kg |
| Sleeping Capacity | 2 Person |
| Mattress Thickness | Dual-layer 5cm foam |
| Open Dimensions | 133cm (W) x 220cm (L) x 105cm (H) |
| Closed Dimensions | 133cm (W) x 110cm (L) x 25cm (H) |
| Mattress Dimensions | 130 cm x 220 cm |
| Main Pod Fabric | 280gsm rip-stop polyester canvas with C6 DWR (water-repellency) |
| Water Resistance | 3000mm HH Rating (Main Pod) / 5000mm HH Rating (Rainfly) |
| Main Fabric | 210D polyester |
| Water Resistance | 5,000mm HH Rating |
| Pegs | Yes with Peg Bag |
| Guy Ropes | Yes (4x guy ropes) |
| Storage Bag | Yes |
The TentBox Lite 2.0 is a 2 berth tent.
The TentBox Lite 2.0 is fold-out designed roof tent.
The main pod material is made of 280gsm rip stop polyester canvas with a PVC-backed cordura trim. Grams per square meter (gsm) is a measurement of the fabric's weight and density. A higher gsm indicates a thicker, more durable, and heavier fabric. In this case, 280gsm is considered heavy-duty, suitable for outdoor use. Rip-stop is a fabric weave technique that involves interweaving thicker threads at regular intervals in a crosshatch pattern. This design helps to prevent small tears and rips in the fabric from spreading, enhancing the durability of the material. Polyester is a type of synthetic fiber known for its strength, durability, and resistance to stretching and shrinking. UV50+ Protection is applied to the polyester canvas material to reduce the sun's UV radiation to pass through. The canvas is treated with C6 Durable Water Repellent (DWR water-repellency) a chemical treatment applied to the outer surface of the fabric to increase water-resistance. It causes water to bead up and roll off the fabric instead of soaking in. PVC-backed Cordura trim refers to a specific type of fabric trim that combines the durability of Cordura with the waterproofing and structural benefits of a PVC (polyvinyl chloride) backing.
The TentBox Lite 2.0 travel cover is made of 600D PVC-backed cordua with a YKK zip attachment.
The TentBox Lite 2.0 fabric pod is rated to 3,000mm Hydrostatic Head Rating. The rainfly fabric is rated to 5,000mm Hydrostatic Head Rating and the travel cover fabric is rated to 6,000mm Hydrostatic Head Rating A 3,000mm Hydrostatic Head Rating indicates the height of a column of water exceeds 3,000mm before it starts to leak. The fabric is treated with Durable Water Repellent (DWR) Treatment. DWR is a chemical treatment applied to the outer surface of the fabric to make it water-resistant as it causes water to bead up and roll off the fabric. The Lite 2.0 is equipped with waterproof YKK zips and waterproof, silicone taped seams.
Yes. The TentBox Lite 2.0 is a 4-season rated tent.
The TentBox Lite 2.0 has wind resistance up to 39mph (62.76 km/h, 33.89 knots). On the Beaufort scale, this is up to a Gale force 8 which is Moderately high waves of greater length; edges of crests break into spindrift; foam is blown in well-marked streaks along the direction of the wind.
The TentBox Lite 2.0 weighs 50 kilograms (110.23 pounds).
The TentBox Lite 2.0 including the Telescopic Ladder is 56.8 kilograms (125.222 pounds).
The telescopic ladder weighs 6.8kg (14.991 pounds).
The internal weight capacity of the TentBox Lite 2.0 is 300 kilograms (661.387 pounds)
To Install the TentBox Lite 2.0 you will need the appropriate roof bars rated with dynamic weight limits that exceed the weight of the Lite 2.0 (50kg). A fixing kit is included in the packaging which includes U-Shaped mounting brackets, M8 bolts, sliders, nuts, and spanner. You will need an additional person to help lift the TentBox Lite 2.0 on top of your vehicle safely.
The assembled dimensions of the TentBox Lite 2.0 are Width: 133 cm x Length: 220 cm x Height: 105 cm (W: 4 feet 4.38 inches, L: 7 feet 2.61 inches, H: 3 feet 5.34 inches).
The closed dimensions of the TentBox Lite 2.0 are Width: 133 cm x Length: 110 cm x Height: 25 cm (W: 4 feet 4.38 inches, L: 3 feet 7.31 inches, H: 0 feet 9.84 inches).
The sleeping space in the TentBox Lite 2.0 is 130 cm x 220 cm (W: 4 feet 3.18 inches, L: 7 feet 2.61 inches)
The TentBox Lite 2.0 has four long inside pockets, a small hanging pocket, a drop-down pole storage bag and storage staps under the fold-out base of the TentBox
No, when closed the TentBox Lite 2.0 is folded and cannot store bedding.
The TentBox Lite 2.0 is specifically compatible with the following TentBox Accessories: The Lite 2.0 Tunnel Awning, The Lite 2.0 Living Pod (1.9m or 2.3m Length), The Lite 2.0 Comfort Topper, The Lite 2.0 Thermal Kit, The Lite 2.0 Fitted Sheets, Lite 2.0 Ventilation Mat, Lite 2.0 Storage Web, Lite Windbreak
The fixing kit includes U-Shaped mounting brackets, M8 bolts, sliders, nuts, and spanner.
Purchasing at Outdoor Roadie the TentBox Lite 2.0 will come with a 5-year extended warranty to match TentBox's warranty.
The TentBox Lite 2.0 comes in three colour options: Midnight Black, Sunset Orange and Forest Green.
The TentBox Lite 2.0 Welcome Kit comes with a TentBox lanyard, a bamboo toothbrush, fairy lights, and earplugs.
The TentBox Lite 2.0 will be collected, dispatched, and delivered by ArrowXL. Once the Lite 2.0 has been collected an SMS will be sent to the number you have provided to book in a delivery date to deliver the TentBox. The courier will get in contact 1 hour before delivery to give you notice of the delivery.
Yes. The main pod of the TentBox Lite 2.0 has UV50+ Protection applied to the polyester canvas material. A UPF rating of 50+ means that the fabric allows only 1/50th (or 2%) of the sun's UV radiation to pass through.
The main fabric material of the TentBox Lite 2.0 Tunnel Awning is 210D polyester. The pegs and poles of the Lite 2.0 Tunnel Awning is made of lightweight aluminium.
Wing mode on the Lite 2.0 Tunnel Awning allows for the two side panels to be erected to create a large sheltered area. Two additional pairs of the telescopic poles are required to erect the Lite 2.0 Tunnel Awning in wing mode on both sides.
The Lite 2.0 Tunnel Awning has a waterproof rating of 5,000mm of Hydrostatic Head Rating. A 5,000mm Hydrostatic Head Rating indicates the height of a column of water exceeds 5,000mm before the fabric starts to leak.
Step 1: Open and assemble the TentBox Lite 2.0. The Lite 2.0 must not be in summer mode without the rainfly. Step 2: Attach the hooks located at the top of the tunnel awning fabric and attach those hooks to the fabric tabls at the top of the TentBox Lite 2.0 door. Step 3: Locate the eyelets in the Tunnel Awning fabric and slide the telescopic pole into the eyelet and the guy rope knot above and pull the guy rope outwards until you are happy with the tension. Step 4: Peg the guy ropes into the floor at roughly a 60 degree angle. Step 5: Peg the side panels with the appropriate tension to complete setup.
Included is the Tunnel Awning main fabric, pegs, peg bag, set of four guy ropes, one set of two telescopic prop poles and a storage bag.
Need Help Choosing? Book A Call With Our Expert.
Schedule a call with one of our roof top tent experts and they will help you pick the right product for your needs.
Book A Call
